| Val-Matic |
|
Val-matic is a market leader in the design and manufacture of valves for water/waste water in commercial, industrial, and municipal applications and set the quality standard by which others are measured. They are perhaps most well known across the world for the manufacture check valves, quarter turn shut-off valves, air valves, and foot valves for water/wastewater, industrial and building applications. Valve types include the SURGEBUSTER®, Tilted Disc®, Dual Disc®, Swing-Flex® and Silent Check® Valves; Plug Valves, Butterfly Valves, nine types of Air Valves, and Sure Seal Foot Valves. From fresh water to waste water, you will find Val-Matic valves on line.
These are just a few of the many applications in which Val-Matic valves have given years of efficient, trouble-free service. For rugged, reliable valves, you will not be disappointed if you specify Val-Matic.
Val-Matic has developed the most comprehensive line of air valves available today. From simple lever Air Valvesto Air/Vacuum Valves to 20" custom Combination Valves. All are provided with stainless steel trim and floats as standard. All Val-Matic Air Valvefloats are unconditionally guaranteed.
For more detailed information, click on:
Eighty yearsago the specifier had only to pull out a standard swing check valve specification and add it to the system plans regardless of location orapplication. Today, however, engineers weigh the importance of slamming characteristics, headloss, cost of purchase and cost of maintenance when making a check valve selection. Val-Matichas utilized the same criteria in the design of our five different check valvelines. Available in a wide range of metallurgies, seating materials andoptions, Val-Matic is prepared to meet your check valve needs. From potable water, to abrasive slurries, and even corrosive chemicals! "SURGEBUSTER" The SURGEBUSTER® is a swing check valve thatfully meets ANSI/AWWA C508. But here is where the similarities to traditional swing check valves end. The SURGEBUSTER® achieves rapid closure througha short disc stroke of 35° and adjustable Disc AcceleratorTM. The short disc stroke isless than half the typical 80° to 90° stroke of a conventional swing check valve. It is achieved byplacing the valve seat on a 45° angle while maintaining a full flow area equal tothe mating pipe (Figures 1 & 2.)
The Disc AcceleratorTM is a precision formed stainless steel mechanism that closes thevalve discrapidly thus avoiding slamming by flow reversal and yet allowing the disc to be stabilized under flow conditions. The accelerator is fully enclosed within the valve and completely out of the flow path.
Click here to watch the demonstration of the SURGEBUSTER.
For more detailed information click on: -
The eccentric action of the Cam-Centric® Plug Valve allows the Plug to rotate in and out of its seated position minimizing rubbing or scrapping. Features such as a heavy duty, vulcanized plug, welded nickel seat, grit sealsand vee-type packing make the Cam-Centric® a valve that will operate leak-free for years to come. It has been proven in installations throughout the world as well as through independent proof of design and flow test. For more detailed information click on: - Cam Centric plug valves
The Val-Matic Ener•GTM AWWA Rubber Seated Ball Valve has proven and preferred design features and advanced technology that only Val-Matic experience can provide. The Ener•GTM Ball Valve is designed for tight seating, long life andenergy savings. For more detailed information click on: - Rubber seated Ball Valves
|
In systems where slurries, grit, or solids are present, proper valve selection has long been a concern to the user. The aggressive character of the media can quickly take its toll on shut off valves, resulting in leakage or worse. Val-Matic'ssolution for these types of flows is the Cam-Centric® Plug Valve. 
